irqchip/renesas-rzv2h: Add max_tssel to struct rzv2h_hw_info

The number of GPIO interrupts on RZ/G3E for TINT selection is 141 compared
to 86 on RZ/V2H. Rename the macro ICU_PB5_TINT->ICU_RZV2H_TSSEL_MAX_VAL to
hold this difference for RZ/V2H.

Add max_tssel to struct rzv2h_hw_info and replace the hardcoded constants
in the code.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20250224131253.134199-9-biju.das.jz@bp.renesas.com

Author: bijudas

drivers/irqchip/irq-renesas-rzv2h.c

@@ -78,14 +78,16 @@
 
 #define ICU_TINT_EXTRACT_HWIRQ(x)		FIELD_GET(GENMASK(15, 0), (x))
 #define ICU_TINT_EXTRACT_GPIOINT(x)		FIELD_GET(GENMASK(31, 16), (x))
-#define ICU_PB5_TINT				0x55
+#define ICU_RZV2H_TSSEL_MAX_VAL			0x55
 
 /**
  * struct rzv2h_hw_info - Interrupt Control Unit controller hardware info structure.
  * @t_offs:		TINT offset
+ * @max_tssel:		TSSEL max value
  */
 struct rzv2h_hw_info {
 	u16		t_offs;
+	u8		max_tssel;
 };
 
 /**
@@ -298,13 +300,12 @@ static int rzv2h_tint_set_type(struct irq_data *d, unsigned int type)
 		return -EINVAL;
 	}
 
+	priv = irq_data_to_priv(d);
 	tint = (u32)(uintptr_t)irq_data_get_irq_chip_data(d);
-	if (tint > ICU_PB5_TINT)
+	if (tint > priv->info->max_tssel)
 		return -EINVAL;
 
-	priv = irq_data_to_priv(d);
 	hwirq = irqd_to_hwirq(d);
-
 	tint_nr = hwirq - ICU_TINT_START;
 
 	tssr_k = ICU_TSSR_K(tint_nr);
@@ -517,6 +518,7 @@ static int rzv2h_icu_init_common(struct device_node *node, struct device_node *p
 
 static const struct rzv2h_hw_info rzv2h_hw_params = {
 	.t_offs		= 0,
+	.max_tssel	= ICU_RZV2H_TSSEL_MAX_VAL,
 };
 
 static int rzv2h_icu_init(struct device_node *node, struct device_node *parent)