Skip to content

Commit ebb6a68

Browse files
rabaraDinh Nguyen
authored andcommitted
arm64: dts: socfpga: agilex5: add support for modular board
The Agilex5 Modular board consists of a compute module (Agilex5 SoCFPGA) attached to a carrier board that provides PCIe and additional system interfaces. Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
1 parent 2bd42d8 commit ebb6a68

2 files changed

Lines changed: 110 additions & 0 deletions

File tree

arch/arm64/boot/dts/intel/Makefile

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
55
socfpga_agilex3_socdk.dtb \
66
socfpga_agilex5_socdk.dtb \
77
socfpga_agilex5_socdk_013b.dtb \
8+
socfpga_agilex5_socdk_modular.dtb \
89
socfpga_agilex5_socdk_nand.dtb \
910
socfpga_n5x_socdk.dtb
1011
dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
Lines changed: 109 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,109 @@
1+
// SPDX-License-Identifier: GPL-2.0-only
2+
/*
3+
* Copyright (C) 2025, Altera Corporation
4+
*/
5+
#include "socfpga_agilex5.dtsi"
6+
7+
/ {
8+
model = "SoCFPGA Agilex5 SoCDK - Modular development kit";
9+
compatible = "intel,socfpga-agilex5-socdk-modular", "intel,socfpga-agilex5";
10+
11+
aliases {
12+
serial0 = &uart0;
13+
ethernet2 = &gmac2;
14+
};
15+
16+
chosen {
17+
stdout-path = "serial0:115200n8";
18+
};
19+
20+
leds {
21+
compatible = "gpio-leds";
22+
23+
led0 {
24+
label = "hps_led0";
25+
gpios = <&porta 0x0 GPIO_ACTIVE_HIGH>;
26+
linux,default-trigger = "heartbeat";
27+
};
28+
};
29+
30+
memory@80000000 {
31+
device_type = "memory";
32+
/* We expect the bootloader to fill in the reg */
33+
reg = <0x0 0x80000000 0x0 0x0>;
34+
};
35+
};
36+
37+
&gpio0 {
38+
status = "okay";
39+
};
40+
41+
&gpio1 {
42+
status = "okay";
43+
};
44+
45+
&gmac2 {
46+
status = "okay";
47+
phy-mode = "rgmii-id";
48+
phy-handle = <&emac2_phy0>;
49+
max-frame-size = <9000>;
50+
51+
mdio0 {
52+
compatible = "snps,dwmac-mdio";
53+
#address-cells = <1>;
54+
#size-cells = <0>;
55+
56+
emac2_phy0: ethernet-phy@0 {
57+
reg = <0>;
58+
};
59+
};
60+
};
61+
62+
&osc1 {
63+
clock-frequency = <25000000>;
64+
};
65+
66+
&qspi {
67+
status = "okay";
68+
flash@0 {
69+
compatible = "micron,mt25qu02g", "jedec,spi-nor";
70+
reg = <0>;
71+
spi-max-frequency = <100000000>;
72+
m25p,fast-read;
73+
cdns,read-delay = <2>;
74+
cdns,tshsl-ns = <50>;
75+
cdns,tsd2d-ns = <50>;
76+
cdns,tchsh-ns = <4>;
77+
cdns,tslch-ns = <4>;
78+
spi-tx-bus-width = <4>;
79+
spi-rx-bus-width = <4>;
80+
81+
partitions {
82+
compatible = "fixed-partitions";
83+
#address-cells = <1>;
84+
#size-cells = <1>;
85+
86+
qspi_boot: partition@0 {
87+
label = "u-boot";
88+
reg = <0x0 0x04200000>;
89+
};
90+
91+
root: partition@4200000 {
92+
label = "root";
93+
reg = <0x04200000 0x0be00000>;
94+
};
95+
};
96+
};
97+
};
98+
99+
&smmu {
100+
status = "okay";
101+
};
102+
103+
&uart0 {
104+
status = "okay";
105+
};
106+
107+
&watchdog0 {
108+
status = "okay";
109+
};

0 commit comments

Comments
 (0)