Merge branches 'clk-bindings', 'clk-cleanup', 'clk-renesas', 'clk-thead' and 'clk-spacemit' into clk-next

* clk-bindings:
  dt-bindings: clock: mediatek: Add power-domains property
  dt-bindings: clock: silabs,si5341: Add missing properties
  dt-bindings: clock: adi,axi-clkgen: add clock-output-names property
  dt-bindings: clock: Remove unused fujitsu,mb86s70-crg11 binding
  dt-bindings: clock: Convert silabs,si570 to DT schema
  dt-bindings: clock: Convert silabs,si5341 to DT schema
  dt-bindings: clock: Convert silabs,si514/544 to DT schema

* clk-cleanup:
  clk: tegra: do not overallocate memory for bpmp clocks
  clk: ep93xx: Use int type to store negative error codes
  dt-bindings: clock: st: flexgen: remove deprecated compatibles
  clk: st: flexgen: remove unused compatible
  clk: clk-axi-clkgen: remove unneeded semicolon
  clk: tegra: Remove redundant semicolons
  clk: npcm: select CONFIG_AUXILIARY_BUS
  clk: remove unneeded 'fast_io' parameter in regmap_config

* clk-renesas: (27 commits)
  clk: renesas: r9a09g05[67]: Reduce differences
  clk: renesas: r9a09g047: Add USB3.0 clocks/resets
  clk: renesas: cpg-mssr: Fix memory leak in cpg_mssr_reserved_init()
  clk: renesas: r9a09g056: Add clock and reset entries for I3C
  clk: renesas: r9a09g057: Add clock and reset entries for I3C
  dt-bindings: clock: renesas,r9a09g047-cpg: Add USB3.0 core clocks
  clk: renesas: r9a09g077: Add Ethernet Subsystem core and module clocks
  clk: renesas: rzv2h: Simplify polling condition in __rzv2h_cpg_assert()
  clk: renesas: rzv2h: Re-assert reset on deassert timeout
  clk: renesas: rzg2l: Re-assert reset on deassert timeout
  clk: renesas: rzg2l: Simplify rzg2l_cpg_assert() and rzg2l_cpg_deassert()
  dt-bindings: clock: renesas,r9a09g077/87: Add Ethernet clock IDs
  clk: renesas: r9a09g047: Add GPT clocks and resets
  clk: renesas: r9a09g077: Add module clocks for SCI1-SCI5
  clk: renesas: rzv2h: remove round_rate() in favor of determine_rate()
  clk: renesas: rzg2l: convert from round_rate() to determine_rate()
  clk: renesas: r9a07g04[34]: Use tabs instead of spaces
  clk: renesas: r9a07g043: Add MSTOP for RZ/G2UL
  clk: renesas: r9a07g044: Add MSTOP for RZ/G2L
  clk: renesas: r9a08g045: Add MSTOP for GPIO
  ...

* clk-thead:
  clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL
  clk: thead: support changing DPU pixel clock rate
  clk: thead: add support for enabling/disabling PLLs
  clk: thead: Correct parent for DPU pixel clocks
  clk: thead: th1520-ap: fix parent of padctrl0 clock
  clk: thead: th1520-ap: describe gate clocks with clk_gate

* clk-spacemit:
  clk: spacemit: fix i2s clock
  clk: spacemit: introduce pre-div for ddn clock
  dt-bindings: clock: spacemit: introduce i2s pre-clock to fix i2s clock
  clk: spacemit: ccu_pll: convert from round_rate() to determine_rate()
  clk: spacemit: ccu_mix: convert from round_rate() to determine_rate()
  clk: spacemit: ccu_ddn: convert from round_rate() to determine_rate()
  clk: spacemit: fix sspax_clk
  dt-bindings: clock: spacemit: CLK_SSPA_I2S_BCLK for SSPA

Author: bebarino

Documentation/devicetree/bindings/clock/st/st,flexgen.txt

@@ -64,12 +64,9 @@ Required properties:
   audio use case)
   "st,flexgen-video", "st,flexgen" (enable clock propagation on parent
 					and activate synchronous mode)
-  "st,flexgen-stih407-a0"
   "st,flexgen-stih410-a0"
-  "st,flexgen-stih407-c0"
   "st,flexgen-stih410-c0"
   "st,flexgen-stih418-c0"
-  "st,flexgen-stih407-d0"
   "st,flexgen-stih410-d0"
   "st,flexgen-stih407-d2"
   "st,flexgen-stih418-d2"

Documentation/devicetree/bindings/pinctrl/renesas,r9a09g077-pinctrl.yaml

@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,r9a09g077-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/T2H and RZ/N2H Pin and GPIO controller
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The Renesas RZ/T2H and RZ/N2H SoCs feature a combined Pin and GPIO controller.
+  Pin multiplexing and GPIO configuration are performed on a per-pin basis.
+  Each port supports up to 8 pins, each configurable for either GPIO (port mode)
+  or alternate function mode. Each pin supports function mode values ranging from
+  0x0 to 0x2A, allowing selection from up to 43 different functions.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r9a09g077-pinctrl # RZ/T2H
+      - renesas,r9a09g087-pinctrl # RZ/N2H
+
+  reg:
+    minItems: 1
+    items:
+      - description: Non-safety I/O Port base
+      - description: Safety I/O Port safety region base
+      - description: Safety I/O Port Non-safety region base
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: nsr
+      - const: srs
+      - const: srn
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZT2H_GPIO() helper macro from <dt-bindings/pinctrl/renesas,r9a09g077-pinctrl.h>
+      (e.g. "RZT2H_GPIO(3, 0)" for P03_0). The second cell represents the consumer
+      flag. Use the macros defined in include/dt-bindings/gpio/gpio.h.
+
+  gpio-ranges:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+definitions:
+  renesas-rzt2h-n2h-pins-node:
+    type: object
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+    properties:
+      pinmux:
+        description:
+          Values are constructed from I/O port number, pin number, and
+          alternate function configuration number using the RZT2H_PORT_PINMUX()
+          helper macro from <dt-bindings/pinctrl/renesas,r9a09g077-pinctrl.h>.
+      pins: true
+      phandle: true
+      input: true
+      input-enable: true
+      output-enable: true
+    oneOf:
+      - required: [pinmux]
+      - required: [pins]
+    additionalProperties: false
+
+patternProperties:
+  # Grouping nodes: allow multiple "-pins" subnodes within a "-group"
+  '.*-group$':
+    type: object
+    description:
+      Pin controller client devices can organize pin configuration entries into
+      grouping nodes ending in "-group". These group nodes may contain multiple
+      child nodes each ending in "-pins" to configure distinct sets of pins.
+    additionalProperties: false
+    patternProperties:
+      '-pins$':
+        $ref: '#/definitions/renesas-rzt2h-n2h-pins-node'
+
+  # Standalone "-pins" nodes under client devices or groups
+  '-pins$':
+    $ref: '#/definitions/renesas-rzt2h-n2h-pins-node'
+
+  '-hog$':
+    type: object
+    description: GPIO hog node
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+    required:
+      - gpio-hog
+      - gpios
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - clocks
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h>
+    #include <dt-bindings/pinctrl/renesas,r9a09g077-pinctrl.h>
+
+    pinctrl@802c0000 {
+        compatible = "renesas,r9a09g077-pinctrl";
+        reg = <0x802c0000 0x2000>,
+              <0x812c0000 0x2000>,
+              <0x802b0000 0x2000>;
+        reg-names = "nsr", "srs", "srn";
+        clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 0 288>;
+        power-domains = <&cpg>;
+
+        serial0-pins {
+            pinmux = <RZT2H_PORT_PINMUX(38, 0, 1)>, /* Tx */
+                     <RZT2H_PORT_PINMUX(38, 1, 1)>; /* Rx */
+        };
+
+        sd1-pwr-en-hog {
+            gpio-hog;
+            gpios = <RZT2H_GPIO(39, 2) 0>;
+            output-high;
+            line-name = "sd1_pwr_en";
+        };
+
+        i2c0-pins {
+            pins = "RIIC0_SDA", "RIIC0_SCL";
+            input-enable;
+        };
+
+        sd0-sd-group {
+            ctrl-pins {
+                pinmux = <RZT2H_PORT_PINMUX(12, 0, 0x29)>, /* SD0_CLK */
+                         <RZT2H_PORT_PINMUX(12, 1, 0x29)>; /* SD0_CMD */
+            };
+
+            data-pins {
+                pinmux = <RZT2H_PORT_PINMUX(12, 0, 0x29)>, /* SD0_CLK */
+                         <RZT2H_PORT_PINMUX(12, 1, 0x29)>; /* SD0_CMD */
+            };
+        };
+    };

drivers/clk/Kconfig

@@ -364,6 +364,7 @@ config COMMON_CLK_LOCHNAGAR
 config COMMON_CLK_NPCM8XX
 	tristate "Clock driver for the NPCM8XX SoC Family"
 	depends on ARCH_NPCM || COMPILE_TEST
+	select AUXILIARY_BUS
 	help
 	  This driver supports the clocks on the Nuvoton BMC NPCM8XX SoC Family,
 	  all the clocks are initialized by the bootloader, so this driver

drivers/clk/actions/owl-common.c

@@ -18,7 +18,6 @@ static const struct regmap_config owl_regmap_config = {
 	.reg_stride	= 4,
 	.val_bits	= 32,
 	.max_register	= 0x00cc,
-	.fast_io	= true,
 };
 
 static void owl_clk_set_regmap(const struct owl_clk_desc *desc,

drivers/clk/clk-axi-clkgen.c

@@ -540,7 +540,7 @@ static int axi_clkgen_setup_limits(struct axi_clkgen *axi_clkgen,
 	default:
 		return dev_err_probe(dev, -ENODEV, "Unknown speed grade %d\n",
 				     speed_grade);
-	};
+	}
 
 	/* Overwrite vco limits for ultrascale+ */
 	if (tech == ADI_AXI_FPGA_TECH_ULTRASCALE_PLUS) {

drivers/clk/clk-axm5516.c

@@ -529,7 +529,6 @@ static const struct regmap_config axmclk_regmap_config = {
 	.reg_stride	= 4,
 	.val_bits	= 32,
 	.max_register	= 0x1fffc,
-	.fast_io	= true,
 };
 
 static const struct of_device_id axmclk_match_table[] = {

drivers/clk/clk-ep93xx.c

@@ -486,9 +486,10 @@ static const struct ep93xx_gate ep93xx_uarts[] = {
 static int ep93xx_uart_clock_init(struct ep93xx_clk_priv *priv)
 {
 	struct clk_parent_data parent_data = { };
-	unsigned int i, idx, ret, clk_uart_div;
+	unsigned int i, idx, clk_uart_div;
 	struct ep93xx_clk *clk;
 	u32 val;
+	int ret;
 
 	regmap_read(priv->map, EP93XX_SYSCON_PWRCNT, &val);
 	if (val & EP93XX_SYSCON_PWRCNT_UARTBAUD)

drivers/clk/nxp/clk-lpc32xx.c

@@ -68,7 +68,6 @@ static const struct regmap_config lpc32xx_scb_regmap_config = {
 	.reg_stride = 4,
 	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 	.max_register = 0x114,
-	.fast_io = true,
 };
 
 static struct regmap *clk_regmap;

drivers/clk/qcom/a53-pll.c

@@ -33,7 +33,6 @@ static const struct regmap_config a53pll_regmap_config = {
 	.reg_stride		= 4,
 	.val_bits		= 32,
 	.max_register		= 0x40,
-	.fast_io		= true,
 };
 
 static struct pll_freq_tbl *qcom_a53pll_get_freq_tbl(struct device *dev)

drivers/clk/qcom/a7-pll.c

@@ -50,7 +50,6 @@ static const struct regmap_config a7pll_regmap_config = {
 	.reg_stride		= 4,
 	.val_bits		= 32,
 	.max_register		= 0x1000,
-	.fast_io		= true,
 };
 
 static int qcom_a7pll_probe(struct platform_device *pdev)