Merge tag 'i2c-for-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "A set of regular driver fixes"

* tag 'i2c-for-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()
  i2c: hisi: Only use the completion interrupt to finish the transfer
  i2c: hisi: Avoid redundant interrupts
  i2c: mxs: ensure that DMA buffers are safe for DMA
  i2c: imx-lpi2c: check only for enabled interrupt flags
  i2c: imx-lpi2c: clean rx/tx buffers upon new message

Author: torvalds

drivers/i2c/busses/i2c-hisi.c

@@ -316,6 +316,13 @@ static void hisi_i2c_xfer_msg(struct hisi_i2c_controller *ctlr)
 		    max_write == 0)
 			break;
 	}
+
+	/*
+	 * Disable the TX_EMPTY interrupt after finishing all the messages to
+	 * avoid overwhelming the CPU.
+	 */
+	if (ctlr->msg_tx_idx == ctlr->msg_num)
+		hisi_i2c_disable_int(ctlr, HISI_I2C_INT_TX_EMPTY);
 }
 
 static irqreturn_t hisi_i2c_irq(int irq, void *context)
@@ -341,7 +348,11 @@ static irqreturn_t hisi_i2c_irq(int irq, void *context)
 		hisi_i2c_read_rx_fifo(ctlr);
 
 out:
-	if (int_stat & HISI_I2C_INT_TRANS_CPLT || ctlr->xfer_err) {
+	/*
+	 * Only use TRANS_CPLT to indicate the completion. On error cases we'll
+	 * get two interrupts, INT_ERR first then TRANS_CPLT.
+	 */
+	if (int_stat & HISI_I2C_INT_TRANS_CPLT) {
 		hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
 		hisi_i2c_clear_int(ctlr, HISI_I2C_INT_ALL);
 		complete(ctlr->completion);

drivers/i2c/busses/i2c-imx-lpi2c.c

@@ -463,6 +463,8 @@ static int lpi2c_imx_xfer(struct i2c_adapter *adapter,
 		if (num == 1 && msgs[0].len == 0)
 			goto stop;
 
+		lpi2c_imx->rx_buf = NULL;
+		lpi2c_imx->tx_buf = NULL;
 		lpi2c_imx->delivered = 0;
 		lpi2c_imx->msglen = msgs[i].len;
 		init_completion(&lpi2c_imx->complete);
@@ -503,10 +505,14 @@ static int lpi2c_imx_xfer(struct i2c_adapter *adapter,
 static irqreturn_t lpi2c_imx_isr(int irq, void *dev_id)
 {
 	struct lpi2c_imx_struct *lpi2c_imx = dev_id;
+	unsigned int enabled;
 	unsigned int temp;
 
+	enabled = readl(lpi2c_imx->base + LPI2C_MIER);
+
 	lpi2c_imx_intctrl(lpi2c_imx, 0);
 	temp = readl(lpi2c_imx->base + LPI2C_MSR);
+	temp &= enabled;
 
 	if (temp & MSR_RDF)
 		lpi2c_imx_read_rxfifo(lpi2c_imx);

drivers/i2c/busses/i2c-mxs.c

@@ -171,7 +171,7 @@ static void mxs_i2c_dma_irq_callback(void *param)
 }
 
 static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
-			struct i2c_msg *msg, uint32_t flags)
+			struct i2c_msg *msg, u8 *buf, uint32_t flags)
 {
 	struct dma_async_tx_descriptor *desc;
 	struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
@@ -226,7 +226,7 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
 		}
 
 		/* Queue the DMA data transfer. */
-		sg_init_one(&i2c->sg_io[1], msg->buf, msg->len);
+		sg_init_one(&i2c->sg_io[1], buf, msg->len);
 		dma_map_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE);
 		desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[1], 1,
 					DMA_DEV_TO_MEM,
@@ -259,7 +259,7 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
 		/* Queue the DMA data transfer. */
 		sg_init_table(i2c->sg_io, 2);
 		sg_set_buf(&i2c->sg_io[0], &i2c->addr_data, 1);
-		sg_set_buf(&i2c->sg_io[1], msg->buf, msg->len);
+		sg_set_buf(&i2c->sg_io[1], buf, msg->len);
 		dma_map_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
 		desc = dmaengine_prep_slave_sg(i2c->dmach, i2c->sg_io, 2,
 					DMA_MEM_TO_DEV,
@@ -563,6 +563,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 	struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
 	int ret;
 	int flags;
+	u8 *dma_buf;
 	int use_pio = 0;
 	unsigned long time_left;
 
@@ -588,13 +589,20 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 		if (ret && (ret != -ENXIO))
 			mxs_i2c_reset(i2c);
 	} else {
+		dma_buf = i2c_get_dma_safe_msg_buf(msg, 1);
+		if (!dma_buf)
+			return -ENOMEM;
+
 		reinit_completion(&i2c->cmd_complete);
-		ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
-		if (ret)
+		ret = mxs_i2c_dma_setup_xfer(adap, msg, dma_buf, flags);
+		if (ret) {
+			i2c_put_dma_safe_msg_buf(dma_buf, msg, false);
 			return ret;
+		}
 
 		time_left = wait_for_completion_timeout(&i2c->cmd_complete,
 						msecs_to_jiffies(1000));
+		i2c_put_dma_safe_msg_buf(dma_buf, msg, true);
 		if (!time_left)
 			goto timeout;
 

drivers/i2c/busses/i2c-xgene-slimpro.c

@@ -308,6 +308,9 @@ static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip,
 	u32 msg[3];
 	int rc;
 
+	if (writelen > I2C_SMBUS_BLOCK_MAX)
+		return -EINVAL;
+
 	memcpy(ctx->dma_buffer, data, writelen);
 	paddr = dma_map_single(ctx->dev, ctx->dma_buffer, writelen,
 			       DMA_TO_DEVICE);