x86/irq: Remove unused vectors defines

UV_BAU_MESSAGE is defined but not used anywhere in the kernel. Presumably
this is a stale vector number that can be reclaimed.

MCE_VECTOR is not an actual vector: #MC is an exception, not an interrupt
vector, and as such is correctly described as X86_TRAP_MC. MCE_VECTOR is
not used anywhere is the kernel.

Note that NMI_VECTOR *is* used; specifically it is the vector number
programmed into the APIC LVT when an NMI interrupt is configured. At
the moment it is always numerically identical to X86_TRAP_NMI, that is
not necessarily going to be the case indefinitely.

Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20210519212154.511983-4-hpa@zytor.com

Author: H. Peter Anvin (Intel)

arch/x86/include/asm/irq_vectors.h

@@ -26,8 +26,8 @@
  * This file enumerates the exact layout of them:
  */
 
+/* This is used as an interrupt vector when programming the APIC. */
 #define NMI_VECTOR			0x02
-#define MCE_VECTOR			0x12
 
 /*
  * IDT vectors usable for external interrupt sources start at 0x20.
@@ -84,7 +84,7 @@
  */
 #define IRQ_WORK_VECTOR			0xf6
 
-#define UV_BAU_MESSAGE			0xf5
+/* 0xf5 - unused, was UV_BAU_MESSAGE */
 #define DEFERRED_ERROR_VECTOR		0xf4
 
 /* Vector on which hypervisor callbacks will be delivered */

tools/arch/x86/include/asm/irq_vectors.h

@@ -26,8 +26,8 @@
  * This file enumerates the exact layout of them:
  */
 
+/* This is used as an interrupt vector when programming the APIC. */
 #define NMI_VECTOR			0x02
-#define MCE_VECTOR			0x12
 
 /*
  * IDT vectors usable for external interrupt sources start at 0x20.
@@ -84,7 +84,7 @@
  */
 #define IRQ_WORK_VECTOR			0xf6
 
-#define UV_BAU_MESSAGE			0xf5
+/* 0xf5 - unused, was UV_BAU_MESSAGE */
 #define DEFERRED_ERROR_VECTOR		0xf4
 
 /* Vector on which hypervisor callbacks will be delivered */