hwmon: (gpio-fan) move fan_alarm_init after devm_hwmon_device_register_with_groups

This makes it possible to use the hwmon_dev in fan_alarm_notify(). Otherwise
it would be possible, that a interupt arrives and fan_alarm_notify() is
executed, before hwmon_dev is initialized.

Signed-off-by: Christian Schneider <cschneider@radiodata.biz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Author: Christian Schneider

drivers/hwmon/gpio-fan.c

@@ -510,13 +510,6 @@ static int gpio_fan_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, fan_data);
 	mutex_init(&fan_data->lock);
 
-	/* Configure alarm GPIO if available. */
-	if (fan_data->alarm_gpio) {
-		err = fan_alarm_init(fan_data);
-		if (err)
-			return err;
-	}
-
 	/* Configure control GPIOs if available. */
 	if (fan_data->gpios && fan_data->num_gpios > 0) {
 		if (!fan_data->speed || fan_data->num_speed <= 1)
@@ -537,6 +530,13 @@ static int gpio_fan_probe(struct platform_device *pdev)
 	if (IS_ERR(fan_data->hwmon_dev))
 		return PTR_ERR(fan_data->hwmon_dev);
 
+	/* Configure alarm GPIO if available. */
+	if (fan_data->alarm_gpio) {
+		err = fan_alarm_init(fan_data);
+		if (err)
+			return err;
+	}
+
 	/* Optional cooling device register for Device tree platforms */
 	fan_data->cdev = devm_thermal_of_cooling_device_register(dev, np,
 				"gpio-fan", fan_data, &gpio_fan_cool_ops);