Merge tag 'linux-can-fixes-for-5.16-20220109' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2022-01-09

The first patch is by Johan Hovold and fixes a mem leak in the error
path of the softing_cs driver.

The next patch is by me and fixes a set but not used variable warning
in the softing driver.

Jiasheng Jiang's patch for the xilinx_can driver adds the missing
error checking when getting the IRQ.

Lad Prabhakar contributes a patch for the rcar_canfd driver to fix a
mem leak in the error path.

The last patch is by Brian Silverman and properly initializes the send
USB messages to avoid spurious CAN error frames.

* tag 'linux-can-fixes-for-5.16-20220109' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved}
  can: rcar_canfd: rcar_canfd_channel_probe(): make sure we free CAN network device
  can: xilinx_can: xcan_probe(): check for error irq
  can: softing: softing_startstop(): fix set but not used variable warning
  can: softing_cs: softingcs_probe(): fix memleak on registration failure
====================

Link: https://lore.kernel.org/r/20220109134040.1945428-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Author: kuba-moo

drivers/net/can/rcar/rcar_canfd.c

@@ -1640,8 +1640,7 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
 	ndev = alloc_candev(sizeof(*priv), RCANFD_FIFO_DEPTH);
 	if (!ndev) {
 		dev_err(&pdev->dev, "alloc_candev() failed\n");
-		err = -ENOMEM;
-		goto fail;
+		return -ENOMEM;
 	}
 	priv = netdev_priv(ndev);
 
@@ -1735,8 +1734,8 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
 
 fail_candev:
 	netif_napi_del(&priv->napi);
-	free_candev(ndev);
 fail:
+	free_candev(ndev);
 	return err;
 }
 

drivers/net/can/softing/softing_cs.c

@@ -293,7 +293,7 @@ static int softingcs_probe(struct pcmcia_device *pcmcia)
 	return 0;
 
 platform_failed:
-	kfree(dev);
+	platform_device_put(pdev);
 mem_failed:
 pcmcia_bad:
 pcmcia_failed:

drivers/net/can/softing/softing_fw.c

@@ -565,18 +565,19 @@ int softing_startstop(struct net_device *dev, int up)
 		if (ret < 0)
 			goto failed;
 	}
-	/* enable_error_frame */
-	/*
+
+	/* enable_error_frame
+	 *
 	 * Error reporting is switched off at the moment since
 	 * the receiving of them is not yet 100% verified
 	 * This should be enabled sooner or later
-	 *
-	if (error_reporting) {
+	 */
+	if (0 && error_reporting) {
 		ret = softing_fct_cmd(card, 51, "enable_error_frame");
 		if (ret < 0)
 			goto failed;
 	}
-	*/
+
 	/* initialize interface */
 	iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 2]);
 	iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 4]);

drivers/net/can/usb/gs_usb.c

@@ -508,6 +508,8 @@ static netdev_tx_t gs_can_start_xmit(struct sk_buff *skb,
 
 	hf->echo_id = idx;
 	hf->channel = dev->channel;
+	hf->flags = 0;
+	hf->reserved = 0;
 
 	cf = (struct can_frame *)skb->data;
 

drivers/net/can/xilinx_can.c

@@ -1761,7 +1761,12 @@ static int xcan_probe(struct platform_device *pdev)
 	spin_lock_init(&priv->tx_lock);
 
 	/* Get IRQ for the device */
-	ndev->irq = platform_get_irq(pdev, 0);
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		goto err_free;
+
+	ndev->irq = ret;
+
 	ndev->flags |= IFF_ECHO;	/* We support local echo */
 
 	platform_set_drvdata(pdev, ndev);