Merge tag 'for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "No core patches, only driver updates:

   - pwr-mlxbf: new reset driver for Mellanox BlueField

   - at91-reset: SAMA7G5 support

   - ab8500: continue refurbishing

   - misc minor fixes"

* tag 'for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (29 commits)
  power: supply: olpc_battery: Hold the reference returned by of_find_compatible_node
  power: supply: ab8500: add missing destroy_workqueue in ab8500_charger_bind
  power: supply: ab8500: Remove flush_scheduled_work() call.
  power: supply: ab8500_fg: drop duplicated 'is' in comment
  power: supply: ab8500: Drop external charger leftovers
  power: supply: ab8500: Add MAINTAINERS entry
  dt-bindings: power: reset: qcom,pshold: convert to dtschema
  power: supply: Fix typo in power_supply_check_supplies
  power: reset: pwr-mlxbf: change rst_pwr_hid and low_pwr_hid from global to local variables
  power: reset: pwr-mlxbf: add missing include
  power: reset: at91-reset: add support for SAMA7G5
  power: reset: at91-reset: add reset_controller_dev support
  power: reset: at91-reset: add at91_reset_data
  power: reset: at91-reset: document structures and enums
  dt-bindings: reset: add sama7g5 definitions
  dt-bindings: reset: atmel,at91sam9260-reset: add sama7g5 bindings
  dt-bindings: reset: convert Atmel/Microchip reset controller to YAML
  power: reset: pwr-mlxbf: add BlueField SoC power control driver
  power: supply: ab8500: Exit maintenance if too low voltage
  power: supply: ab8500: Respect charge_restart_voltage_uv
  ...

Author: torvalds

Documentation/devicetree/bindings/arm/atmel-sysregs.txt

@@ -25,21 +25,6 @@ System Timer (ST) required properties:
 Its subnodes can be:
 - watchdog: compatible should be "atmel,at91rm9200-wdt"
 
-RSTC Reset Controller required properties:
-- compatible: Should be "atmel,<chip>-rstc".
-  <chip> can be "at91sam9260", "at91sam9g45", "sama5d3" or "samx7"
-  it also can be "microchip,sam9x60-rstc"
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-Example:
-
-	rstc@fffffd00 {
-		compatible = "atmel,at91sam9260-rstc";
-		reg = <0xfffffd00 0x10>;
-		clocks = <&clk32k>;
-	};
-
 RAMC SDRAM/DDR Controller required properties:
 - compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
 			"atmel,at91sam9260-sdramc",

Documentation/devicetree/bindings/power/reset/msm-poweroff.txt

@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/qcom,pshold.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC restart and power off
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  A power supply hold (ps-hold) bit is set to power the Qualcomm chipsets.
+  Clearing that bit allows us to restart/power off. The difference between
+  power off and restart is determined by unique power manager IC settings.
+
+properties:
+  compatible:
+    const: qcom,pshold
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@fc4ab000 {
+        compatible = "qcom,pshold";
+        reg = <0xfc4ab000 0x4>;
+    };

Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml

@@ -28,7 +28,7 @@ properties:
     maxItems: 1
 
   usb-otg-vbus:
-    type: object
+    $ref: /schemas/regulator/regulator.yaml#
     description: |
       Regulator that is used to control the VBUS voltage direction for
       either USB host mode or for charging on the OTG port

Documentation/devicetree/bindings/power/supply/bq24190.yaml

@@ -117,11 +117,18 @@ properties:
       be done externally to fully comply with the JEITA safety guidelines if this flag
       is set.
 
+  usb-charge-current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 2500000
+    description: |
+      Default USB charge current limit in uA.
+
   usb-otg-in-supply:
     description: Reference to the regulator supplying power to the USB_OTG_IN pin.
 
   otg-vbus:
-    type: object
+    $ref: /schemas/regulator/regulator.yaml#
     description: |
       This node defines a regulator used to control the direction of VBUS voltage.
       Specifically whether to supply voltage to VBUS for host mode operation of the OTG port,

Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml

@@ -82,7 +82,7 @@ properties:
       - 1 # SMB3XX_SYSOK_INOK_ACTIVE_HIGH
 
   usb-vbus:
-    $ref: "../../regulator/regulator.yaml#"
+    $ref: /schemas/regulator/regulator.yaml#
     type: object
 
     properties:

Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml

@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/atmel,at91sam9260-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel/Microchip System Reset Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  The system reset controller can be used to reset the CPU. In case of
+  SAMA7G5 it can also reset some devices (e.g. USB PHYs).
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91sam9260-rstc
+              - atmel,at91sam9g45-rstc
+              - atmel,sama5d3-rstc
+              - microchip,sam9x60-rstc
+              - microchip,sama7g5-rstc
+      - items:
+          - const: atmel,sama5d3-rstc
+          - const: atmel,at91sam9g45-rstc
+
+  reg:
+    minItems: 1
+    items:
+      - description: base registers for system reset control
+      - description: registers for device specific reset control
+
+  clocks:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,sama7g5-rstc
+    then:
+      required:
+        - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+
+    reset-controller@fffffd00 {
+        compatible = "atmel,at91sam9260-rstc";
+        reg = <0xfffffd00 0x10>;
+        clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+    };

Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml

@@ -264,6 +264,11 @@ W:	http://www.adaptec.com/
 F:	Documentation/scsi/aacraid.rst
 F:	drivers/scsi/aacraid/
 
+AB8500 BATTERY AND CHARGER DRIVERS
+M:	Linus Walleij <linus.walleij@linaro.org>
+F:	Documentation/devicetree/bindings/power/supply/*ab8500*
+F:	drivers/power/supply/*ab8500*
+
 ABI/API
 L:	linux-api@vger.kernel.org
 F:	include/linux/syscalls.h

MAINTAINERS

@@ -297,4 +297,10 @@ config NVMEM_REBOOT_MODE
 	  then the bootloader can read it and take different
 	  action according to the mode.
 
+config POWER_MLXBF
+	tristate "Mellanox BlueField power handling driver"
+	depends on (GPIO_MLXBF2 && ACPI)
+	help
+	  This driver supports reset or low power mode handling for Mellanox BlueField.
+
 endif

drivers/power/reset/Kconfig

@@ -35,3 +35,4 @@ obj-$(CONFIG_REBOOT_MODE) += reboot-mode.o
 obj-$(CONFIG_SYSCON_REBOOT_MODE) += syscon-reboot-mode.o
 obj-$(CONFIG_POWER_RESET_SC27XX) += sc27xx-poweroff.o
 obj-$(CONFIG_NVMEM_REBOOT_MODE) += nvmem-reboot-mode.o
+obj-$(CONFIG_POWER_MLXBF) += pwr-mlxbf.o