ProjectConfig.h

#pragma once
#include "Project/FeatureProfiles.h"

// Explicit temporary verification profile. The ordinary source/default build
// retains RF administration; this test image keeps learned RF execution while
// freeing flash for the combined MCU recorder and 100-pixel strip exercise.
#ifndef PCCONTROLLER_MACRO_STRIP_TEST
#define PCCONTROLLER_MACRO_STRIP_TEST 0
#endif
#ifndef PCCONTROLLER_ENABLE_RF_LEARNING
#define PCCONTROLLER_ENABLE_RF_LEARNING (!PCCONTROLLER_MACRO_STRIP_TEST)
#endif
#if (PCCONTROLLER_MACRO_STRIP_TEST != 0) && (PCCONTROLLER_MACRO_STRIP_TEST != 1)
#error "PCCONTROLLER_MACRO_STRIP_TEST must be 0 or 1"
#endif
#if (PCCONTROLLER_ENABLE_RF_LEARNING != 0) && (PCCONTROLLER_ENABLE_RF_LEARNING != 1)
#error "PCCONTROLLER_ENABLE_RF_LEARNING must be 0 or 1"
#endif

// The UART is the primary COBS/opcode application link, not a debug console.
#ifndef PCCONTROLLER_UART_BAUD
#define PCCONTROLLER_UART_BAUD 115200UL
#endif

// The configured board uses up to 100 WS2811 pixels in BRG order on D6. Set this to 1
// for a WS2812B/GRB strip when the final hardware is confirmed.
#ifndef PCCONTROLLER_USE_WS2812B
#define PCCONTROLLER_USE_WS2812B 0
#endif

// Logical PWM 0 is off and 4095 is fully on. The MOSFET modules are active
// high; change this only if a later output stage is electrically inverted.
#ifndef PCCONTROLLER_PWM_ACTIVE_LOW
#define PCCONTROLLER_PWM_ACTIVE_LOW 0
#endif

// Raw 74HC165 levels for the two monitored inputs. A conventional reed switch
// wired to ground is low while the door magnet is present/closed, so an open
// door is normally read high. BT audio modules commonly sink the indicator
// LED cathode while it is illuminated, so that input defaults active-low.
// Flip either value after electrical verification if the board buffers it
// differently.
#ifndef PCCONTROLLER_DOOR_OPEN_RAW_HIGH
#define PCCONTROLLER_DOOR_OPEN_RAW_HIGH 1
#endif

#ifndef PCCONTROLLER_BT_LED_ON_RAW_HIGH
#define PCCONTROLLER_BT_LED_ON_RAW_HIGH 0
#endif

// The host owns the 16x2 PCF8574 LCD through the generic I2C opcode. Keeping
// the full HD44780 renderer off the 328P recovers flash for the timed macro
// queue; the host still scans 0x27/0x3F and mirrors all text/front-panel state.
#ifndef PCCONTROLLER_ENABLE_I2C_LCD
#define PCCONTROLLER_ENABLE_I2C_LCD 0
#endif

// Optional cooperative callback scheduler. No production task is registered
// on the ATmega328P profile, so keeping the engine off recovers its dormant
// object/code while preserving a build gate for larger-MCU profiles.
#ifndef PCCONTROLLER_ENABLE_TASK_SCHEDULER
#define PCCONTROLLER_ENABLE_TASK_SCHEDULER 0
#endif

// TonePlayer remains the board-wide playback engine in every profile. This
// gate owns only unsolicited/local cue policy: door and motion/output feedback
// can be omitted by a host-only or larger-MCU profile without removing direct
// BUZZER commands, macro playback, or the Silent setting.
#ifndef PCCONTROLLER_ENABLE_LOCAL_AUDIO_CUES
#define PCCONTROLLER_ENABLE_LOCAL_AUDIO_CUES 1
#endif

// The compact core-cue controller may load four frequency/duration triples
// from the CRC-backed startup region. Disabling this keeps the exact immutable
// fallbacks and avoids an EEPROM dependency; it does not disable local cues.
#ifndef PCCONTROLLER_ENABLE_EEPROM_AUDIO_CUES
#define PCCONTROLLER_ENABLE_EEPROM_AUDIO_CUES 0
#endif

#if (PCCONTROLLER_ENABLE_LOCAL_AUDIO_CUES != 0) && \
    (PCCONTROLLER_ENABLE_LOCAL_AUDIO_CUES != 1)
#error "PCCONTROLLER_ENABLE_LOCAL_AUDIO_CUES must be 0 or 1"
#endif

#if (PCCONTROLLER_ENABLE_EEPROM_AUDIO_CUES != 0) && \
    (PCCONTROLLER_ENABLE_EEPROM_AUDIO_CUES != 1)
#error "PCCONTROLLER_ENABLE_EEPROM_AUDIO_CUES must be 0 or 1"
#endif

// Rich catalog/layout presentation is host-owned. Stable page IDs and the
// fixed EEPROM bytes remain, but the AVR does not carry duplicate directory,
// ordering, hierarchy, or layout-protocol implementations in release builds.
#ifndef PCCONTROLLER_ENABLE_MENU_DIRECTORY
#define PCCONTROLLER_ENABLE_MENU_DIRECTORY 0
#endif

#ifndef PCCONTROLLER_MENU_LAYOUT_STORAGE
#define PCCONTROLLER_MENU_LAYOUT_STORAGE 1
#endif

// Keep the fixed 4-character front-panel menu labels in the factory EEPROM
// image instead of program flash. The feature is deliberately opt-in because
// an unprovisioned/corrupt EEPROM must fall back to the built-in labels.
#ifndef PCCONTROLLER_ENABLE_EEPROM_MENU_LABELS
#define PCCONTROLLER_ENABLE_EEPROM_MENU_LABELS 0
#endif

// AVR-owned persistent front-panel catalog. Stable page IDs remain protocol
// identities while EEPROM stores a separate visibility mask and packed rank.
#ifndef PCCONTROLLER_MENU_VISIBILITY
#define PCCONTROLLER_MENU_VISIBILITY 0
#endif

#ifndef PCCONTROLLER_MENU_ORDERING
#define PCCONTROLLER_MENU_ORDERING 0
#endif

#ifndef PCCONTROLLER_MENU_HIERARCHY
#define PCCONTROLLER_MENU_HIERARCHY 0
#endif

#ifndef PCCONTROLLER_MENU_LAYOUT_PROTOCOL
#define PCCONTROLLER_MENU_LAYOUT_PROTOCOL 0
#endif

// Optional AVR profile: execute a compact, CRC-validated EEPROM boot script
// after safety initialization. It is disabled in the byte-tight base image;
// the reviewed host feature profile pairs it with immutable local-audio
// fallbacks instead of the optional EEPROM cue loader so the exact AVR size
// gate still passes.
#ifndef PCCONTROLLER_ENABLE_EEPROM_BOOT_OPCODES
#define PCCONTROLLER_ENABLE_EEPROM_BOOT_OPCODES 0
#endif

#if PCCONTROLLER_ENABLE_EEPROM_BOOT_OPCODES != 0 && \
    PCCONTROLLER_ENABLE_EEPROM_BOOT_OPCODES != 1
#error "PCCONTROLLER_ENABLE_EEPROM_BOOT_OPCODES must be 0 or 1"
#endif

// The complete board-owned automation core is retained and native-tested, but
// the current accepted ATmega328P image has only 136 application bytes free.
// Enabling this implementation currently exceeds the immutable 0x7DF4
// application ceiling; keep it off until an explicit product choice frees
// flash or selects a larger MCU. Host/offline tooling remains available.
#ifndef PCCONTROLLER_ENABLE_BOARD_AUTOMATIONS
#define PCCONTROLLER_ENABLE_BOARD_AUTOMATIONS 0
#endif

#if PCCONTROLLER_ENABLE_BOARD_AUTOMATIONS && PCCONTROLLER_ENABLE_EEPROM_MENU_LABELS
#error "Board automations and EEPROM menu labels cannot share the constrained ATmega328P tail"
#endif

#if PCCONTROLLER_MENU_ORDERING && !PCCONTROLLER_MENU_VISIBILITY
#error "Menu ordering requires persistent visibility"
#endif

#if PCCONTROLLER_MENU_HIERARCHY && !PCCONTROLLER_MENU_ORDERING
#error "Nested menus require persistent ordering"
#endif

#if PCCONTROLLER_MENU_LAYOUT_PROTOCOL && !PCCONTROLLER_MENU_ORDERING
#error "Menu-layout protocol requires persistent ordering"
#endif