mfd: tmio: Move header to platform_data

All the MFD components are gone from the header meanwhile. Only the MMC
relevant data is left which makes it a platform_data for the MMC
controller. Move the header to the now fitting directory.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213220221.2380-14-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>

Author: Wolfram Sang

MAINTAINERS

@@ -22685,7 +22685,7 @@ L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
 F:	drivers/mmc/host/renesas_sdhi*
 F:	drivers/mmc/host/tmio_mmc*
-F:	include/linux/mfd/tmio.h
+F:	include/linux/platform_data/tmio.h
 
 TMP513 HARDWARE MONITOR DRIVER
 M:	Eric Tremblay <etremblay@distech-controls.com>

arch/sh/boards/board-sh7757lcr.c

@@ -14,9 +14,9 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/io.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/sh_mmcif.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/sh_eth.h>
 #include <linux/sh_intc.h>
 #include <linux/usb/renesas_usbhs.h>

arch/sh/boards/mach-ap325rxa/setup.c

@@ -24,10 +24,10 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/sh_flctl.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>

arch/sh/boards/mach-ecovec24/setup.c

@@ -17,13 +17,13 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/interrupt.h>
 #include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/sh_mmcif.h>
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
 #include <linux/platform_data/gpio_backlight.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_data/tsc2007.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>

arch/sh/boards/mach-kfr2r09/setup.c

@@ -22,10 +22,10 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/interrupt.h>
 #include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_data/lv5207lp.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>

arch/sh/boards/mach-migor/setup.c

@@ -7,14 +7,14 @@
 #include <linux/clkdev.h>
 #include <linux/dma-map-ops.h>
 #include <linux/init.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/memblock.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mtd/platnand.h>
 #include <linux/i2c.h>
 #include <linux/regulator/fixed.h>

arch/sh/boards/mach-se/7724/setup.c

@@ -21,9 +21,9 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/interrupt.h>
 #include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>

drivers/mmc/host/renesas_sdhi_core.c

@@ -22,13 +22,13 @@
 #include <linux/delay.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/slot-gpio.h>
 #include <linux/module.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinctrl-state.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/regulator/consumer.h>

drivers/mmc/host/renesas_sdhi_internal_dmac.c

@@ -11,12 +11,12 @@
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/io-64-nonatomic-hi-lo.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pagemap.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/scatterlist.h>

drivers/mmc/host/renesas_sdhi_sys_dmac.c

@@ -11,12 +11,12 @@
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pagemap.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/scatterlist.h>