ARM: dts: microchip: sam9x7: Add address/size to spi-controller nodes

Since these properties are common for all spi subnodes,
add them to SoC dtsi instead of board dts.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20241218080333.2225-3-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>

Author: Mihai Sain

arch/arm/boot/dts/microchip/sam9x7.dtsi

@@ -132,6 +132,8 @@
 				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
 				reg = <0x400 0x200>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				clock-names = "spi_clk";
 				dmas = <&dma0
@@ -203,6 +205,8 @@
 				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
 				reg = <0x400 0x200>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "spi_clk";
 				dmas = <&dma0
@@ -697,6 +701,8 @@
 				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
 				reg = <0x400 0x200>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				clock-names = "spi_clk";
 				dmas = <&dma0
@@ -768,6 +774,8 @@
 				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
 				reg = <0x400 0x200>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 				clock-names = "spi_clk";
 				dmas = <&dma0
@@ -839,6 +847,8 @@
 				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
 				reg = <0x400 0x200>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				clock-names = "spi_clk";
 				dmas = <&dma0
@@ -910,6 +920,8 @@
 				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
 				reg = <0x400 0x200>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "spi_clk";
 				dmas = <&dma0