qtvcp -sim configs: remove MAX_RAPID_OVERRIDE INI setting

missed these the first time. rapid override always has a max of 100%

Author: c-morley

configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini

@@ -19,7 +19,6 @@ PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon.pref
 
 # min/max percentage overrides allowed in qtdragon 1 = 100%
 MAX_FEED_OVERRIDE       = 1.2
-MAX_RAPID_OVERRIDE      = 1.2
 MIN_SPINDLE_0_OVERRIDE    = 0.5
 MAX_SPINDLE_0_OVERRIDE    = 1.2
 

configs/sim/woodpecker/woodpecker.ini

@@ -13,7 +13,6 @@ POSITION_OFFSET = RELATIVE
 POSITION_FEEDBACK = ACTUAL
 GRIDS = 10mm 20mm 50mm 100mm 1in 2in 5in 10in
 MAX_FEED_OVERRIDE       = 1.2
-MAX_RAPID_OVERRIDE      = 1.2
 MIN_SPINDLE_0_OVERRIDE    = 0.5
 MAX_SPINDLE_0_OVERRIDE    = 1.2
 DEFAULT_SPINDLE_0_SPEED   = 12000

configs/sim/woodpecker/woodpecker_auto_tool_probe.ini

@@ -15,7 +15,6 @@ TITLE = Woodpecker XYZ Auto Tool Probe
 PREFERENCE_FILE_PATH = WORKINGFOLDER/woodpecker.pref
 GRIDS = 10mm 20mm 50mm 100mm 1in 2in 5in 10in
 MAX_FEED_OVERRIDE       = 1.2
-MAX_RAPID_OVERRIDE      = 1.2
 MIN_SPINDLE_0_OVERRIDE    = 0.5
 MAX_SPINDLE_0_OVERRIDE    = 1.2
 DEFAULT_SPINDLE_0_SPEED   = 12000

configs/sim/woodpecker/woodpecker_xyz.ini

@@ -13,7 +13,6 @@ POSITION_OFFSET = RELATIVE
 POSITION_FEEDBACK = ACTUAL
 GRIDS = 10mm 20mm 50mm 100mm 1in 2in 5in 10in
 MAX_FEED_OVERRIDE       = 1.2
-MAX_RAPID_OVERRIDE      = 1.2
 DEFAULT_SPINDLE_0_SPEED = 12000
 SPINDLE_INCREMENT = 200
 MIN_SPINDLE_0_SPEED = 1000

configs/sim/woodpecker/woodpecker_xyza.ini

@@ -15,7 +15,6 @@ GEOMETRY = XYZABCUVW
 GRIDS = 10mm 20mm 50mm 100mm 1in 2in 5in 10in
 #CONE_BASESIZE = 0.1
 MAX_FEED_OVERRIDE       = 1.2
-MAX_RAPID_OVERRIDE      = 1.2
 MIN_SPINDLE_0_OVERRIDE    = 0.5
 MAX_SPINDLE_0_OVERRIDE    = 1.2
 DEFAULT_SPINDLE_0_SPEED = 12000

configs/sim/woodpecker/woodpecker_xyzab.ini

@@ -14,7 +14,6 @@ POSITION_FEEDBACK = ACTUAL
 GEOMETRY = XYZABCUVW
 GRIDS = 10mm 20mm 50mm 100mm 1in 2in 5in 10in
 MAX_FEED_OVERRIDE  = 1.2
-MAX_RAPID_OVERRIDE = 1.2
 #spindle
 MIN_SPINDLE_0_OVERRIDE   = 0.5
 MAX_SPINDLE_0_OVERRIDE   = 1.2

configs/sim/woodpecker/woodpecker_xyzy.ini

@@ -13,7 +13,6 @@ POSITION_OFFSET = RELATIVE
 POSITION_FEEDBACK = ACTUAL
 GRIDS = 10mm 20mm 50mm 100mm 1in 2in 5in 10in
 MAX_FEED_OVERRIDE       = 1.2
-MAX_RAPID_OVERRIDE      = 1.2
 DEFAULT_SPINDLE_0_SPEED = 12000
 SPINDLE_INCREMENT = 200
 MIN_SPINDLE_0_SPEED = 1000

configs/sim/woodpecker/woodpecker_xyzya.ini

@@ -14,7 +14,6 @@ POSITION_FEEDBACK = ACTUAL
 GEOMETRY = XYZABCUVW
 GRIDS = 10mm 20mm 50mm 100mm 1in 2in 5in 10in
 MAX_FEED_OVERRIDE       = 1.2
-MAX_RAPID_OVERRIDE      = 1.2
 MIN_SPINDLE_OVERRIDE    = 0.5
 MAX_SPINDLE_OVERRIDE    = 1.2
 DEFAULT_SPINDLE_0_SPEED = 12000