gscreen silverdragon: remove MAX_RAPID_OVERRIDE from INI file settings (#2392)

This makes no sense as rapids are done with the maximum machine velocity so an override > 1 would have no effect.

Author: hansu

configs/sim/gscreen/silverdragon/silverdragon.ini

@@ -17,7 +17,6 @@ CYCLE_TIME =            100
 #PREFERENCE_FILE_PATH = /home/jim/linuxcnc/configs/sim.gscreen.gscreen_custom/silverdragon.pref
 # Values that will be allowed for override, 1.0 = 100%
 MAX_FEED_OVERRIDE    =  1.5
-MAX_RAPID_OVERRIDE   =  1.0
 MAX_SPINDLE_OVERRIDE =  1.2
 MIN_SPINDLE_OVERRIDE =  0.5
 DEFAULT_SPINDLE_SPEED = 24000

share/gscreen/skins/silverdragon/silverdragon_handler.py

@@ -207,15 +207,14 @@ def initialize_preferences(self):
         self.data.spindle_override_max = self.gscreen.inifile.find("DISPLAY", "MAX_SPINDLE_OVERRIDE")
         self.data.spindle_override_min = self.gscreen.inifile.find("DISPLAY", "MIN_SPINDLE_OVERRIDE")
         self.data.feed_override_max = self.gscreen.inifile.find("DISPLAY", "MAX_FEED_OVERRIDE")
-        self.data.rapid_override_max = self.gscreen.inifile.find("DISPLAY", "MAX_RAPID_OVERRIDE")
         self.data.dro_actual = self.gscreen.inifile.find("DISPLAY", "POSITION_FEEDBACK")
         # set the slider limits
         self.widgets.jog_speed.set_range(100, float(self.jog_rate_max) * 60)
         self.widgets.jog_speed.set_value(default_jog_vel * 60)
         self.widgets.jog_speed.set_digits(0)
         self.widgets.spc_spindle.set_range(float(self.data.spindle_override_min) * 100, float(self.data.spindle_override_max) * 100)
         self.widgets.spc_spindle.set_value(100)
-        self.widgets.spc_rapid.set_range(1, float(self.data.rapid_override_max) * 100)
+        self.widgets.spc_rapid.set_range(1, 100)
         self.widgets.spc_rapid.set_value(100)
         self.widgets.spc_feed.set_range(1, float(self.data.feed_override_max) * 100)
         self.widgets.spc_feed.set_value(100)