Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
  Nothing really major in here, just lots of constant development for
  new hardware. Included in here are:

   - Thunderbolt (i.e. USB4) fixes for reported issues and support for
     new hardware types and devices

   - USB typec additions of new drivers and cleanups for some existing
     ones

   - xhci cleanups and expanded tracing support and some platform
     specific updates

   - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
     spi, and i2c drivers for that type of device (all acked by the
     respective subsystem maintainers.)

   - lots of USB gadget driver updates and cleanups

   - new USB dwc3 platforms supported, as well as other dwc3 fixes and
     cleanups

   - USB chipidea driver updates

   - other smaller driver cleanups and additions, full details in the
     shortlog

  All of these have been in the linux-next tree for a while with no
  reported problems"

* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
  usb: gadget: uvc: Add missing initialization of ssp config descriptor
  usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
  usb: raw-gadget: report suspend, resume, reset, and disconnect events
  usb: raw-gadget: don't disable device if usb_ep_queue fails
  usb: raw-gadget: properly handle interrupted requests
  usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
  usb: gadget: aspeed_udc: Convert to platform remove callback returning void
  dt-bindings: usb: fsa4480: Add compatible for OCP96011
  usb: typec: fsa4480: Add support to swap SBU orientation
  dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
  usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
  Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
  Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
  thunderbolt: Fix one kernel-doc comment
  usb: gadget: f_ncm: Always set current gadget in ncm_bind()
  usb: core: Remove duplicated check in usb_hub_create_port_device
  usb: typec: tcpm: Add additional checks for contaminant
  arm64: dts: rockchip: rk3588s: Add USB3 host controller
  usb: dwc3: add optional PHY interface clocks
  dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
  ...

Author: torvalds

Documentation/ABI/testing/configfs-usb-gadget-uac2

@@ -35,4 +35,6 @@ Description:
 		req_number		the number of pre-allocated requests
 					for both capture and playback
 		function_name		name of the interface
+		c_terminal_type		code of the capture terminal type
+		p_terminal_type		code of the playback terminal type
 		=====================	=======================================

Documentation/ABI/testing/sysfs-bus-usb

@@ -313,6 +313,15 @@ Description:
 		Inter-Chip SSIC devices support asymmetric lanes up to 4 lanes per
 		direction. Devices before USB 3.2 are single lane (tx_lanes = 1)
 
+What:		/sys/bus/usb/devices/.../typec
+Date:		November 2023
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Symlink to the USB Type-C partner device. USB Type-C partner
+		represents the component that communicates over the
+		Configuration Channel (CC signal on USB Type-C connectors and
+		cables) with the local port.
+
 What:		/sys/bus/usb/devices/usbX/bAlternateSetting
 Description:
 		The current interface alternate setting number, in decimal.

Documentation/ABI/testing/sysfs-class-usb_power_delivery

@@ -124,6 +124,13 @@ Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
 Description:
 		The voltage the supply supports in millivolts.
 
+What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:fixed_supply/peak_current
+Date:		October 2023
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This file shows the value of the Fixed Power Source Peak Current
+		Capability field.
+
 What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:fixed_supply/maximum_current
 Date:		May 2022
 Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml

@@ -20,6 +20,7 @@ properties:
       - qcom,qcm2290-qmp-usb3-phy
       - qcom,sa8775p-qmp-usb3-uni-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
+      - qcom,sdx75-qmp-usb3-uni-phy
       - qcom,sm6115-qmp-usb3-phy
 
   reg:
@@ -75,6 +76,7 @@ allOf:
           contains:
             enum:
               - qcom,ipq9574-qmp-usb3-phy
+              - qcom,sdx75-qmp-usb3-uni-phy
     then:
       properties:
         clock-names:

Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml

@@ -14,7 +14,12 @@ description:
 
 properties:
   compatible:
-    const: qcom,sm8550-snps-eusb2-phy
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sdx75-snps-eusb2-phy
+          - const: qcom,sm8550-snps-eusb2-phy
+      - const: qcom,sm8550-snps-eusb2-phy
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml

@@ -35,6 +35,12 @@ properties:
   '#size-cells':
     const: 0
 
+  orientation-gpios:
+    description: Array of input gpios for the Type-C connector orientation indication.
+      The GPIO indication is used to detect the orientation of the Type-C connector.
+      The array should contain a gpio entry for each PMIC Glink connector, in reg order.
+      It is defined that GPIO active level means "CC2" or Reversed/Flipped orientation.
+
 patternProperties:
   '^connector@\d$':
     $ref: /schemas/connector/usb-connector.yaml#
@@ -44,6 +50,19 @@ patternProperties:
 required:
   - compatible
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,sm8450-pmic-glink
+                - qcom,sm8550-pmic-glink
+    then:
+      properties:
+        orientation-gpios: false
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml

@@ -15,7 +15,9 @@ properties:
     oneOf:
       - enum:
           - chipidea,usb2
+          - fsl,imx27-usb
           - lsi,zevio-usb
+          - nuvoton,npcm750-udc
           - nvidia,tegra20-ehci
           - nvidia,tegra20-udc
           - nvidia,tegra30-ehci
@@ -66,6 +68,10 @@ properties:
       - items:
           - const: xlnx,zynq-usb-2.20a
           - const: chipidea,usb2
+      - items:
+          - enum:
+              - nuvoton,npcm845-udc
+          - const: nuvoton,npcm750-udc
 
   reg:
     minItems: 1
@@ -388,6 +394,7 @@ allOf:
             enum:
               - chipidea,usb2
               - lsi,zevio-usb
+              - nuvoton,npcm750-udc
               - nvidia,tegra20-udc
               - nvidia,tegra30-udc
               - nvidia,tegra114-udc

Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml

@@ -11,8 +11,12 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - fcs,fsa4480
+    oneOf:
+      - const: fcs,fsa4480
+      - items:
+          - enum:
+              - ocs,ocp96011
+          - const: fcs,fsa4480
 
   reg:
     maxItems: 1
@@ -32,10 +36,43 @@ properties:
     type: boolean
 
   port:
-    $ref: /schemas/graph.yaml#/properties/port
+    $ref: /schemas/graph.yaml#/$defs/port-base
     description:
       A port node to link the FSA4480 to a TypeC controller for the purpose of
       handling altmode muxing and orientation switching.
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/graph.yaml#/$defs/endpoint-base
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            description:
+              Specifies how the AUX+/- lines are connected to SBU1/2.
+            oneOf:
+              - items:
+                  - const: 0
+                  - const: 1
+                description: |
+                  Default AUX/SBU layout (FSA4480)
+                  - AUX+ connected to SBU2
+                  - AUX- connected to SBU1
+                  Default AUX/SBU layout (OCP96011)
+                  - AUX+ connected to SBU1
+                  - AUX- connected to SBU2
+              - items:
+                  - const: 1
+                  - const: 0
+                description: |
+                  Swapped AUX/SBU layout (FSA4480)
+                  - AUX+ connected to SBU1
+                  - AUX- connected to SBU2
+                  Swapped AUX/SBU layout (OCP96011)
+                  - AUX+ connected to SBU2
+                  - AUX- connected to SBU1
 
 required:
   - compatible

Documentation/devicetree/bindings/usb/genesys,gl850g.yaml

@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Genesys Logic GL850G USB 2.0 hub controller
+title: Genesys Logic USB hub controller
 
 maintainers:
   - Icenowy Zheng <uwu@icenowy.me>
@@ -18,6 +18,7 @@ properties:
       - usb5e3,608
       - usb5e3,610
       - usb5e3,620
+      - usb5e3,626
 
   reg: true
 

Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml

@@ -19,6 +19,7 @@ properties:
   compatible:
     items:
       - enum:
+          - nxp,cbdtu02043
           - onnn,fsusb43l10x
           - pericom,pi3usb102
       - const: gpio-sbu-mux
@@ -50,7 +51,6 @@ required:
   - compatible
   - enable-gpios
   - select-gpios
-  - mode-switch
   - orientation-switch
   - port