arm64: dts: rockchip: Fix wifi interrupts flag on Sakura Pi RK3308B

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.

Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
  ACTIVE_HIGH  => IRQ_TYPE_LEVEL_HIGH

Fixes: 79f2a17 ("arm64: dts: rockchip: add DTs for Sakura Pi RK3308B")
Cc: stable+noautosel@kernel.org # Needs testing, because actual level is just a guess
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Chiyuki Akatsuki <thesnowfield@sakurapi.org>
Link: https://patch.msgid.link/20251217091808.38253-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Author: krzk

arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts

@@ -199,7 +199,7 @@
 		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
 		reg = <1>;
 		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "host-wake";
 		pinctrl-names = "default";
 		pinctrl-0 = <&wifi_host_wake>;