Merge tag 'mfd-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Device Support:
   - Add support for Watchdog to ChromeOS Embedded Controller
   - Add support for GPIOs to ChromeOS Embedded Controller
   - Add supprt for Sound to MediaTek MT6357 CODEC

  New Functionality:
   - Add power-off functionality to Texas Instruments TWL series CODECs

  Fix-ups:
   - Device Tree binding adaptions/conversions/creation
   - Use/convert to new/better APIs/helpers/MACROs instead of
     hand-rolling implementations
   - Trivial; spelling, whitespace, clean-ups, etc
   - Remove superfluous code and simplify overall
   - Fix include lists; alphabetise, remove unused, explicitly add used
   - Use dev_err_probe() to clean-up error paths
   - Convert used cache type over to the Maple Tree in many instances
   - Constify a bunch of static structs
   - Refrain from over-riding resources provided via the firmware

  Bug Fixes:
   - Fix a clock related firmware bug on Dell XPS 9530 et al.
   - Repair incorrect IRQ designations
   - Increase buffer sizes to omit various snprintf compiler errors
   - Ensure errors are handled properly
   - Balance references and prevent resource leaks
   - Rectify Power Key interrupt processing
   - Fix Kconfig related build errors
   - Correct a bunch of register start-up default values"

* tag 'mfd-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
  mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults
  mfd: cs42l43: Fix wrong register defaults
  mfd: mt6397-core: Register mt6357 sound codec
  dt-bindings: mfd: syscon: Add ti,am62-usb-phy-ctrl compatible
  dt-bindings: mfd: dlg,da9063: Make #interrupt-cells required
  dt-bindings: mfd: Convert atmel-flexcom to json-schema
  mfd: kempld-core: Don't replace resources provided by ACPI
  mfd: cros_ec_dev: Add GPIO device if feature present on EC
  dt-bindings: mfd: cros-ec: Add properties for GPIO controller
  mfd: twl: Select MFD_CORE
  mfd: core: Constify the struct device_type usage
  mfd: rk8xx-core: Fix interrupt processing order for power key button
  mfd: twl4030-power: Accept standard property for power controller
  mfd: twl-core: Add power off implementation for twl603x
  dt-bindings: mfd: ti,twl: Document system-power-controller
  mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a ref
  mfd: syscon: Remove extern from function prototypes
  mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref
  mfd: mc13xxx: Use bitfield helpers
  mfd: rc5t583: Convert to use maple tree register cache
  ...

Author: torvalds

Documentation/devicetree/bindings/input/da9062-onkey.txt

@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/dlg,da9062-onkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9061/62/63 OnKey Module
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  This module is part of the DA9061/DA9062/DA9063. For more details about entire
+  DA906{1,2,3} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+
+  This module provides the KEY_POWER event.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - dlg,da9062-onkey
+          - dlg,da9063-onkey
+      - items:
+          - const: dlg,da9061-onkey
+          - const: dlg,da9062-onkey
+
+  dlg,disable-key-power:
+    type: boolean
+    description:
+      Disable power-down using a long key-press. If this entry exists
+      the OnKey driver will remove support for the KEY_POWER key press
+      when triggered using a long press of the OnKey.
+
+required:
+  - compatible
+
+additionalProperties: false

Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml

@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,hlcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's HLCD Controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The Atmel HLCDC (HLCD Controller) IP available on Atmel SoCs exposes two
+  subdevices, a PWM chip and a Display Controller.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9n12-hlcdc
+      - atmel,at91sam9x5-hlcdc
+      - atmel,sama5d2-hlcdc
+      - atmel,sama5d3-hlcdc
+      - atmel,sama5d4-hlcdc
+      - microchip,sam9x60-hlcdc
+      - microchip,sam9x75-xlcdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+
+  clock-names:
+    items:
+      - const: periph_clk
+      - const: sys_clk
+      - const: slow_clk
+      - const: lvds_pll_clk
+    minItems: 3
+
+  display-controller:
+    $ref: /schemas/display/atmel/atmel,hlcdc-display-controller.yaml
+
+  pwm:
+    $ref: /schemas/pwm/atmel,hlcdc-pwm.yaml
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    lcd_controller: lcd-controller@f0030000 {
+      compatible = "atmel,sama5d3-hlcdc";
+      reg = <0xf0030000 0x2000>;
+      clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+      clock-names = "periph_clk", "sys_clk", "slow_clk";
+      interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+
+      display-controller {
+        compatible = "atmel,hlcdc-display-controller";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <0>;
+
+          hlcdc_panel_output: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&panel_input>;
+          };
+        };
+      };
+
+      pwm {
+        compatible = "atmel,hlcdc-pwm";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_lcd_pwm>;
+        #pwm-cells = <3>;
+      };
+    };

Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml

@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Flexcom (Flexible Serial Communication Unit)
+
+maintainers:
+  - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description:
+  The Microchip Flexcom is just a wrapper which embeds a SPI controller,
+  an I2C controller and an USART. Only one function can be used at a
+  time and is chosen at boot time according to the device tree.
+
+properties:
+  compatible:
+    oneOf:
+      - const: atmel,sama5d2-flexcom
+      - items:
+          - const: microchip,sam9x7-flexcom
+          - const: atmel,sama5d2-flexcom
+      - items:
+          - const: microchip,sama7g5-flexcom
+          - const: atmel,sama5d2-flexcom
+
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description:
+      One range for the full I/O register region. (including USART,
+      TWI and SPI registers).
+    items:
+      maxItems: 3
+
+  atmel,flexcom-mode:
+    description: |
+      Specifies the flexcom mode as follows:
+      1: USART
+      2: SPI
+      3: I2C.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+
+patternProperties:
+  "^serial@[0-9a-f]+$":
+    type: object
+    description:
+      Child node describing USART. See atmel-usart.txt for details
+      of USART bindings.
+
+  "^spi@[0-9a-f]+$":
+    type: object
+    description:
+      Child node describing SPI. See ../spi/spi_atmel.txt for details
+      of SPI bindings.
+
+  "^i2c@[0-9a-f]+$":
+    $ref: /schemas/i2c/atmel,at91sam-i2c.yaml
+    description:
+      Child node describing I2C.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - atmel,flexcom-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    flx0: flexcom@f8034000 {
+        compatible = "atmel,sama5d2-flexcom";
+        reg = <0xf8034000 0x200>;
+        clocks = <&flx0_clk>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xf8034000 0x800>;
+        atmel,flexcom-mode = <2>;
+    };
+...