arm64: dts: qcom: Add PCIe3 and PCIe5 support for HAMOA-IOT-SOM platform

HAMOA IoT SOM requires PCIe3 and PCIe5 connectivity for SATA controller
and SDX65.

Add the required sideband signals (PERST#, WAKE#, CLKREQ#), pinctrl states
and power supply properties in the device tree, which PCIe3 and PCIe5
require.

Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260109104504.3147745-3-ziyue.zhang@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Author: Ziyue Zhang

arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi

@@ -390,6 +390,20 @@
 	firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
 };
 
+&pcie3 {
+	pinctrl-0 = <&pcie3_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie3_phy {
+	vdda-phy-supply = <&vreg_l3c_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
 &pcie4 {
 	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
@@ -407,6 +421,20 @@
 	status = "okay";
 };
 
+&pcie5 {
+	pinctrl-0 = <&pcie5_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie5_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
 &pcie6a {
 	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
@@ -453,6 +481,29 @@
 &tlmm {
 	gpio-reserved-ranges = <34 2>; /* TPM LP & INT */
 
+	pcie3_default: pcie3-default-state {
+		clkreq-n-pins {
+			pins = "gpio144";
+			function = "pcie3_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	pcie4_default: pcie4-default-state {
 		clkreq-n-pins {
 			pins = "gpio147";
@@ -476,6 +527,29 @@
 		};
 	};
 
+	pcie5_default: pcie5-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie5_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio149";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	pcie6a_default: pcie6a-default-state {
 		clkreq-n-pins {
 			pins = "gpio153";