Merge remote-tracking branch 'regulator/for-5.19' into regulator-next

Author: broonie

Documentation/ABI/testing/sysfs-class-regulator

@@ -370,3 +370,84 @@ Description:
 
 		'unknown' means software cannot determine the state, or
 		the reported state is invalid.
+
+What:		/sys/class/regulator/.../under_voltage
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		under_voltage.  This indicates if the device reports an
+		under-voltage fault (1) or not (0).
+
+What:		/sys/class/regulator/.../over_current
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_current.  This indicates if the device reports an
+		over-current fault (1) or not (0).
+
+What:		/sys/class/regulator/.../regulation_out
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		regulation_out.  This indicates if the device reports an
+		out-of-regulation fault (1) or not (0).
+
+What:		/sys/class/regulator/.../fail
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		fail.  This indicates if the device reports an output failure
+		(1) or not (0).
+
+What:		/sys/class/regulator/.../over_temp
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_temp.  This indicates if the device reports an
+		over-temperature fault (1) or not (0).
+
+What:		/sys/class/regulator/.../under_voltage_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		under_voltage_warn.  This indicates if the device reports an
+		under-voltage warning (1) or not (0).
+
+What:		/sys/class/regulator/.../over_current_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_current_warn.  This indicates if the device reports an
+		over-current warning (1) or not (0).
+
+What:		/sys/class/regulator/.../over_voltage_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_voltage_warn.  This indicates if the device reports an
+		over-voltage warning (1) or not (0).
+
+What:		/sys/class/regulator/.../over_temp_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_temp_warn.  This indicates if the device reports an
+		over-temperature warning (1) or not (0).

Documentation/devicetree/bindings/regulator/mt6358-regulator.txt

@@ -8,14 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt.
 
 The valid names for regulators are::
 BUCK:
-  buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu,
-  buck_vs2, buck_vmodem, buck_vs1
+  buck_vdram1, buck_vcore, buck_vcore_sshub, buck_vpa, buck_vproc11,
+  buck_vproc12, buck_vgpu, buck_vs2, buck_vmodem, buck_vs1
 LDO:
   ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio,
   ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others,
-  ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28,
-  ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18,
-  ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28,
+  ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18,
+  ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12,
+  ldo_vrf18, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28,
   ldo_vsim2
 
 Example:
@@ -354,5 +354,17 @@ Example:
 				regulator-max-microvolt = <3100000>;
 				regulator-enable-ramp-delay = <540>;
 			};
+
+			mt6358_vcore_sshub_reg: buck_vcore_sshub {
+				regulator-name = "vcore_sshub";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+			};
+
+			mt6358_vsram_others_sshub_reg: ldo_vsram_others_sshub {
+				regulator-name = "vsram_others_sshub";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+			};
 		};
 	};

Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml

@@ -92,6 +92,17 @@ properties:
       LDO5CTRL_L or LDO5CTRL_H register. Use this if the SD_VSEL signal is
       connected to a host GPIO.
 
+  nxp,i2c-lt-enable:
+    type: boolean
+    description:
+      Indicates that the I2C Level Translator is used.
+
+  nxp,wdog_b-warm-reset:
+    type: boolean
+    description:
+      When WDOG_B signal is asserted a warm reset will be done instead of cold
+      reset.
+
 required:
   - compatible
   - reg