Merge branches 'clk-rockchip', 'clk-ingenic', 'clk-bindings', 'clk-samsung' and 'clk-stm' into clk-next

 - Mark some clks critical on Ingenic X1000
 - Add STM32MP13 RCC driver (Reset Clock Controller)

* clk-rockchip:
  dt-bindings: clock: convert rockchip,rk3368-cru.txt to YAML
  dt-bindings: clock: convert rockchip,rk3228-cru.txt to YAML
  dt-bindings: clock: convert rockchip,rk3036-cru.txt to YAML
  dt-bindings: clock: convert rockchip,rk3308-cru.txt to YAML
  dt-bindings: clock: convert rockchip,px30-cru.txt to YAML
  dt-bindings: clock: convert rockchip,rk3188-cru.txt to YAML
  dt-bindings: clock: convert rockchip,rk3288-cru.txt to YAML
  dt-bindings: clock: convert rockchip,rv1108-cru.txt to YAML
  dt-binding: clock: Add missing rk3568 cru bindings
  clk: rockchip: Mark hclk_vo as critical on rk3568
  dt-bindings: clock: fix rk3399 cru clock issues
  dt-bindings: clock: use generic node name for pmucru example in rockchip,rk3399-cru.yaml
  dt-bindings: clock: replace a maintainer for rockchip,rk3399-cru.yaml
  dt-bindings: clock: fix some conversion style issues for rockchip,rk3399-cru.yaml

* clk-ingenic:
  clk: ingenic-tcu: Fix missing TCU clock for X1000 SoCs
  mips: ingenic: Do not manually reference the CPU clock
  clk: ingenic: Mark critical clocks in Ingenic SoCs
  clk: ingenic: Allow specifying common clock flags

* clk-bindings:
  dt-bindings: clock: Replace common binding with link to schema

* clk-samsung:
  dt-bindings: clock: exynosautov9: correct count of NR_CLK
  clk: samsung: exynosautov9: add cmu_peric1 clock support
  clk: samsung: exynosautov9: add cmu_peric0 clock support
  clk: samsung: exynosautov9: add cmu_fsys2 clock support
  clk: samsung: exynosautov9: add cmu_busmc clock support
  clk: samsung: exynosautov9: add cmu_peris clock support
  clk: samsung: exynosautov9: add cmu_core clock support
  clk: samsung: add top clock support for Exynos Auto v9 SoC
  dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings
  dt-bindings: clock: add clock binding definitions for Exynos Auto v9

* clk-stm:
  clk: stm32mp13: add safe mux management
  clk: stm32mp13: add multi mux function
  clk: stm32mp13: add all STM32MP13 kernel clocks
  clk: stm32mp13: add all STM32MP13 peripheral clocks
  clk: stm32mp13: manage secured clocks
  clk: stm32mp13: add composite clock
  clk: stm32mp13: add stm32 divider clock
  clk: stm32mp13: add stm32_gate management
  clk: stm32mp13: add stm32_mux clock management
  clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
  dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC

Author: bebarino

Documentation/devicetree/bindings/clock/clock-bindings.txt

@@ -1,186 +1,2 @@
-This binding is a work-in-progress, and are based on some experimental
-work by benh[1].
-
-Sources of clock signal can be represented by any node in the device
-tree.  Those nodes are designated as clock providers.  Clock consumer
-nodes use a phandle and clock specifier pair to connect clock provider
-outputs to clock inputs.  Similar to the gpio specifiers, a clock
-specifier is an array of zero, one or more cells identifying the clock
-output on a device.  The length of a clock specifier is defined by the
-value of a #clock-cells property in the clock provider node.
-
-[1] https://patchwork.ozlabs.org/patch/31551/
-
-==Clock providers==
-
-Required properties:
-#clock-cells:	   Number of cells in a clock specifier; Typically 0 for nodes
-		   with a single clock output and 1 for nodes with multiple
-		   clock outputs.
-
-Optional properties:
-clock-output-names: Recommended to be a list of strings of clock output signal
-		    names indexed by the first cell in the clock specifier.
-		    However, the meaning of clock-output-names is domain
-		    specific to the clock provider, and is only provided to
-		    encourage using the same meaning for the majority of clock
-		    providers.  This format may not work for clock providers
-		    using a complex clock specifier format.  In those cases it
-		    is recommended to omit this property and create a binding
-		    specific names property.
-
-		    Clock consumer nodes must never directly reference
-		    the provider's clock-output-names property.
-
-For example:
-
-    oscillator {
-        #clock-cells = <1>;
-        clock-output-names = "ckil", "ckih";
-    };
-
-- this node defines a device with two clock outputs, the first named
-  "ckil" and the second named "ckih".  Consumer nodes always reference
-  clocks by index. The names should reflect the clock output signal
-  names for the device.
-
-clock-indices:	   If the identifying number for the clocks in the node
-		   is not linear from zero, then this allows the mapping of
-		   identifiers into the clock-output-names array.
-
-For example, if we have two clocks <&oscillator 1> and <&oscillator 3>:
-
-	oscillator {
-		compatible = "myclocktype";
-		#clock-cells = <1>;
-		clock-indices = <1>, <3>;
-		clock-output-names = "clka", "clkb";
-	}
-
-	This ensures we do not have any empty strings in clock-output-names
-
-
-==Clock consumers==
-
-Required properties:
-clocks:		List of phandle and clock specifier pairs, one pair
-		for each clock input to the device.  Note: if the
-		clock provider specifies '0' for #clock-cells, then
-		only the phandle portion of the pair will appear.
-
-Optional properties:
-clock-names:	List of clock input name strings sorted in the same
-		order as the clocks property.  Consumers drivers
-		will use clock-names to match clock input names
-		with clocks specifiers.
-clock-ranges:	Empty property indicating that child nodes can inherit named
-		clocks from this node. Useful for bus nodes to provide a
-		clock to their children.
-
-For example:
-
-    device {
-        clocks = <&osc 1>, <&ref 0>;
-        clock-names = "baud", "register";
-    };
-
-
-This represents a device with two clock inputs, named "baud" and "register".
-The baud clock is connected to output 1 of the &osc device, and the register
-clock is connected to output 0 of the &ref.
-
-==Example==
-
-    /* external oscillator */
-    osc: oscillator {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency  = <32678>;
-        clock-output-names = "osc";
-    };
-
-    /* phase-locked-loop device, generates a higher frequency clock
-     * from the external oscillator reference */
-    pll: pll@4c000 {
-        compatible = "vendor,some-pll-interface"
-        #clock-cells = <1>;
-        clocks = <&osc 0>;
-        clock-names = "ref";
-        reg = <0x4c000 0x1000>;
-        clock-output-names = "pll", "pll-switched";
-    };
-
-    /* UART, using the low frequency oscillator for the baud clock,
-     * and the high frequency switched PLL output for register
-     * clocking */
-    uart@a000 {
-        compatible = "fsl,imx-uart";
-        reg = <0xa000 0x1000>;
-        interrupts = <33>;
-        clocks = <&osc 0>, <&pll 1>;
-        clock-names = "baud", "register";
-    };
-
-This DT fragment defines three devices: an external oscillator to provide a
-low-frequency reference clock, a PLL device to generate a higher frequency
-clock signal, and a UART.
-
-* The oscillator is fixed-frequency, and provides one clock output, named "osc".
-* The PLL is both a clock provider and a clock consumer. It uses the clock
-  signal generated by the external oscillator, and provides two output signals
-  ("pll" and "pll-switched").
-* The UART has its baud clock connected the external oscillator and its
-  register clock connected to the PLL clock (the "pll-switched" signal)
-
-==Assigned clock parents and rates==
-
-Some platforms may require initial configuration of default parent clocks
-and clock frequencies. Such a configuration can be specified in a device tree
-node through assigned-clocks, assigned-clock-parents and assigned-clock-rates
-properties. The assigned-clock-parents property should contain a list of parent
-clocks in the form of a phandle and clock specifier pair and the
-assigned-clock-rates property should contain a list of frequencies in Hz. Both
-these properties should correspond to the clocks listed in the assigned-clocks
-property.
-
-To skip setting parent or rate of a clock its corresponding entry should be
-set to 0, or can be omitted if it is not followed by any non-zero entry.
-
-    uart@a000 {
-        compatible = "fsl,imx-uart";
-        reg = <0xa000 0x1000>;
-        ...
-        clocks = <&osc 0>, <&pll 1>;
-        clock-names = "baud", "register";
-
-        assigned-clocks = <&clkcon 0>, <&pll 2>;
-        assigned-clock-parents = <&pll 2>;
-        assigned-clock-rates = <0>, <460800>;
-    };
-
-In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and
-the <&pll 2> clock is assigned a frequency value of 460800 Hz.
-
-Configuring a clock's parent and rate through the device node that consumes
-the clock can be done only for clocks that have a single user. Specifying
-conflicting parent or rate configuration in multiple consumer nodes for
-a shared clock is forbidden.
-
-Configuration of common clocks, which affect multiple consumer devices can
-be similarly specified in the clock provider node.
-
-==Protected clocks==
-
-Some platforms or firmwares may not fully expose all the clocks to the OS, such
-as in situations where those clks are used by drivers running in ARM secure
-execution levels. Such a configuration can be specified in device tree with the
-protected-clocks property in the form of a clock specifier list. This property should
-only be specified in the node that is providing the clocks being protected:
-
-   clock-controller@a000f000 {
-        compatible = "vendor,clk95;
-        reg = <0xa000f000 0x1000>
-        #clocks-cells = <1>;
-        ...
-        protected-clocks = <UART3_CLK>, <SPI5_CLK>;
-   };
+This file has moved to the clock binding schema:
+https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/clock/clock.yaml

Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt

@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,px30-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PX30 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The PX30 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input       - required
+    - "xin32k"     - rtc clock           - optional
+    - "i2sx_clkin" - external I2S clock  - optional
+    - "gmac_clkin" - external GMAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-cru
+      - rockchip,px30-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Clock for both PMUCRU and CRU
+      - description: Clock for CRU (sourced from PMUCRU)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - const: gpll
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#reset-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-cru
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+
+    pmucru: clock-controller@ff2bc000 {
+      compatible = "rockchip,px30-pmucru";
+      reg = <0xff2bc000 0x1000>;
+      clocks = <&xin24m>;
+      clock-names = "xin24m";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+    cru: clock-controller@ff2b0000 {
+      compatible = "rockchip,px30-cru";
+      reg = <0xff2b0000 0x1000>;
+      clocks = <&xin24m>, <&pmucru PLL_GPLL>;
+      clock-names = "xin24m", "gpll";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };